Translations on this website are prepared by a third-party provider. Some portions may be incorrect. Some items—including downloadable files or images—cannot be translated at all. No liability is assumed by Beth Israel Deaconess Medical Center for any errors or omissions. Any user who relies on translated content does so at his/her own risk.
Cadaveric models of the shoulder evaluate discrete motion segments using the gleno-humeral joint in isolation over a defined trajectory. The aim of this study was to design, manufacture and validate a robotic system to accurately create 3D upper body motion and capture it them using high speed motion cameras.
In particular, we intended to use the robotic system to simulate the normal throwing motion in an intact cadaver. The robotic system consists of a lower frame (to move the torso) and an upper frame (to move an arm) using seven actuators. The actuators accurately reproduced planned trajectories. The marker setup used for motion capture was able to determine the six degrees of freedom of all involved joints during the planned motion of the end effector.
The testing system demonstrated high precision and accuracy based on the expected versus observed displacements of individual axes. The maximum coefficient of variation for displacement of unloaded axes was less than 0.5 percent for all axes. The expected and observed actual displacements had high level of correlation with coefficients of determination of 1 for all axes.
Given that this system can accurately simulate and track simple and complex motion, there is a new opportunity to study shoulder kinematics under normal and pathologic conditions in a cadaveric shoulder model.