There are two common types of glaucoma surgery: laser and incisional.
The main types of laser surgery include:
Argon Laser Trabeculoplasty (ALT)
Argon laser trabeculoplasty (ALT)
is the most common type of laser surgery. It is usually used to treat open angle glaucoma. During this procedure, you will sit facing the laser machine. The laser "spot" will be applied to a special contact lens held on the front of the eye. You may see flashes of red or green light as the laser is applied. This procedure will allow more fluid to be released and relieve some of the pressure.
Selective Laser Trabeculoplasty (SLT)
The procedure is similar to ALT. SLT has the benefit of being repeatable. ALT cannot be done more than twice.
Laser Peripheral Iridotomy (LPI)
Laser peripheral iridotomy (LPI)
is frequently used to treat narrow-angle glaucoma or to prevent glaucoma attacks in patients with anatomically narrow angles. Narrow-angle glaucoma occurs when the angle between the cornea (the clear structure on the front of the eye) and the iris (the colored part of the eye) is too small. This can cause the iris to plug up so that fluid cannot flow freely. This can cause the pressure to rise to dangerously high levels very quickly. In LPI, the laser will be used to make a small hole in the iris. The hole will allow fluid to flow more freely within the eye.
is used to freeze the parts of the eye that make the eye fluid. This procedure is usually done only in people who have severe damage from glaucoma and for whom other surgeries were not successful. Instead of freezing, this procedure can also be done with a laser.
Incisional Surgery (also known as Filtering Surgery)
This surgery uses tiny instruments to remove a piece from the wall of the eye. This creates a small hole, which is covered by conjunctiva (layer around the eye). The fluid can now drain out through the hole. It will then be reabsorbed into the bloodstream. This reduces the pressure in the eye. In some cases, the doctor may place a valve in the eye through a tiny incision.
If the above methods fail, another option is the use of implants. With implant surgery, most of the device is positioned on the outside of the eye. A small tube or filament is carefully inserted into the front chamber of the eye. The fluid drains through the tube, or along the filament, into the area around the back end of the implant. The fluid collects here and is reabsorbed. This procedure is slightly more risky than standard trabeculoplasty and should only be performed by doctors well-versed in the technique.